In stock


IPV D4 by Pioneer4you Greenleaf – 80W Temp Control Box Mod

In their relentless pursuit to offer the latest technology and highest quality products, Pioneer4You has finally released the long-anticipated IPV D4 Temperature Control Box MOD. Derived from the IPV D3, this incredible new device is more compact, lightweight, and ergonomically designed. All around, the new IPV D4 MOD by Pioneer4You is an exceptional device, perfect for advanced vapers and beginners alike.

The Pioneer4You IPV D4 Box MOD is a variable wattage and variable voltage device, allowing for a wide range of available power. The wattage can be adjusted from 5W to an impressive 80W, while the voltage can be adjusted from between 1V to 7V. This broad scope of power output makes the IPV D4 extremely versatile, as it can be used with sub-ohm atomizers and standard-ohm atomizers alike. In fact, the IPV D4 can accommodate atomizer resistances from 0.15 ohms to 3.0 ohms with Kanthal and NiChrome coils, and 0.05 ohms – 0.5 ohms in temperature control mode with Nickel or Titanium coils. Whether you are a fan of pure lung hits or lung-to-mouth hits, this spectacular device will deliver the perfect hit each and every time.

One of the greatest features of the IPV D4 Box MOD is its temperature control and limiting capability. The device sports the YiHi SX130H-V2 Chip, which is one of the most advanced processors on the market today. This remarkable chip allows you to use nickel (Ni-200), stainless steel, and titanium atomizers, which affords you the capability of setting and adjusting the actual temperature of the atomizer coils. Temperature control not only offers smoother and more flavorful vapor, but also virtually eliminates dry and burned hits. In Temperature Control Mode, the IPV D4 can be set from between 10 Joules to 75 Joules (212°F – 572°F / 100°C – 405°C).

The Pioneer4You IPV D4 is powered by an external 18650 battery (sold separately). This is a great feature, as you can always carry a fully-charged spare battery in your bag, pocket, or purse so that you are never left without a functioning vaporizer. The battery can be effortlessly removed and replaced with the device’s magnetic battery door cover. In addition, the ability to easily remove and replace the IPV D4’s battery eliminates the need to replace the entire device once the battery has surpassed its ability to hold a charge, which is a substantially less expensive option. Moreover, Pionner4You brilliantly designed the IPV D4 with internal charging capability, allowing you to charge the battery inside the device without the need of an external charger.

Aesthetically, the IPV D4 Box MOD is a very beautifully designed device. Pioneer4You paid careful attention to ergonomics, making it very comfortable to hold in your hand throughout the day. It is an extremely compact and lightweight MOD, which is particularly impressive given its power and capabilities. The round curves and simple, yet elegant, look of the IPV D4 radiates quality and sophistication. The face of the device is furnished with the crystal clear OLED screen, as well as the fire and adjustment buttons. The screen provides you with a plethora of important information, such as wattage, temperature, remaining battery life, mode, atomizer resistance, and puff counter.

The IPV D4 is not only light, powerful, and feature-rich, but is also armed with a wide array of important safety measures as well. It is furnished with Reverse Polarity Protection, Output Short Protection, Low Resistance Protection, Battery Low Voltage Protection, Temperature Overheat Protection, and On/Off capability. With this many safety features, you can vape with peace of mind.

If you are looking for a compact, lightweight, technologically advanced, and exceptionally powerful box MOD with temperature control capabilities, look no further—the groundbreaking IPV D4 by Pioneer4You is the perfect choice!

Note: Battery Sold Separately.



External (Sold Separately)




Adjustable Wattage






Pioneer4You IPV D4 MOD Specifications:

Manufactured by: Pioneer4You

Casing Material: High-Grade Aluminum

Thread Material: Stainless Steel

Threading: Spring-Loaded 510 (can accommodate eGo thread with adapter)

Battery Type: Takes Single 18650 IMR High-Drain Battery (Sold Separately)

Wattage Range: 5W – 80W

Voltage Range: 1V – 7V

Temperature Range: (212°F – 572°F / 100°C – 405°C).

Joules Range: 10J – 75J

Output Current: 1A – 25A

Kanthal Atomizer Resistance: 0.15 Ohms – 3.0 Ohms

Nickel/Titanium Atomizer Resistance: 0.05 Ohms – 0.5 Ohms

Input Voltage: 3.2V – 4.5V

Typical Voltage: 3.7V

Input Current: 1.3A – 30A

Length: 2.87 Inches (73 mm)

Width: 2 Inches (50.8 mm)

Depth: 0.87 Inches (22.1 mm)

Weight: 15.87 Ounces (0.45 kg)

Available Colors: Black, Bronze


Pioneer4You IPV D4 MOD Includes:

1 x Pioneer4You IPV D4 80W Box Mod

1 x USB Charging Cable

1 x User Manual

Pioneer4You IPV D4 MOD Features:

Variable Voltage

Variable Wattage

Temperature Control Capability (with Nickel or Titanium Coils)

Can Accommodate NiChrome and Kanthal Coils

Takes External 18650 Battery (Sold Separately)

Uses YiHi SX130H-V2 Chip

Supports Internal Charging

State-of-the-Art OLED Screen

Ergonomically Designed

Built-In Ohms Meter

Battery Level Indicator

Perfect For Sub-Ohm Vaping and Standard Vaping

Sliding Battery Door for Easy Removal

Lightweight and Compact

Extremely Powerful

Reverse Polarity Protection

Output Short Protection

Low Resistance Protection

Battery Low Voltage Protection

Temperature Overheat Protection

On/Off Capability

100% Authentic Pioneer4You

Submit your review

Your email address will not be published. Required fields are marked *


There are no reviews yet.

See It Styled On Instagram

    Instagram did not return a 200.

Main Menu